Guide · Cost
How much does a roof replacement cost in Central Texas?
Short answer: most Central Texas homes run about $9,000–$18,750 for a new asphalt roof, and roughly $14,400–$37,500 for metal. Your exact price depends on size, pitch, and material. Here's the real breakdown.
Price per square, by material
A roofing square covers 100 sq ft of roof. These are real installed prices. They include tear-off, waste, and labor. The three columns are roof pitch: steeper roofs cost more because they're slower and riskier to work.
| Material | Low pitch | Moderate | Steep |
|---|---|---|---|
3-tab asphalt shingles The budget option: a flat, uniform look and roughly a 20–25 year lifespan. | $500/sq | $550/sq | $600/sq |
Architectural (dimensional) shingles The most popular choice: a layered, dimensional look, ~30 year life, and better wind resistance. | $600/sq | $650/sq | $700/sq |
Premium architectural shingles Upgraded architectural shingles with stronger nailing strips and longer wind warranties. | $650/sq | $700/sq | $750/sq |
Corrugated metal Exposed-fastener metal panels: durable, reflective, and the more affordable way into a metal roof. | $800/sq | $1,000/sq | $1,200/sq |
Standing seam metal Premium concealed-fastener metal: a 40–70 year lifespan and the cleanest modern look. | $1,000/sq | $1,250/sq | $1,500/sq |
What that means for a typical home
Most Central Texas homes are 18–25 squares. Here's the rough installed total for each material at that size:
Asphalt shingle
3-tab asphalt shingles
$9,000–$15,000
installed, typical home
Asphalt shingle
Architectural (dimensional) shingles
$10,800–$17,500
installed, typical home
Asphalt shingle
Premium architectural shingles
$11,700–$18,750
installed, typical home
Metal
Corrugated metal
$14,400–$30,000
installed, typical home
Metal
Standing seam metal
$18,000–$37,500
installed, typical home
Estimates only. Your roof's exact size, pitch, and condition set the real price. Veterans and active-duty service members get a free upgrade to Class 4 impact-rated shingles.
What drives your price
Roof size
Measured in squares (1 square = 100 sq ft of roof). Bigger roof, more material and labor. This is the single biggest factor.
Pitch / steepness
Steeper roofs are slower and riskier to work, so they cost more per square (the Low/Moderate/Steep columns below).
Material
Asphalt is the value play; metal costs more up front but lasts two to three times as long.
Tear-off layers
Removing one old layer is standard; a second or third layer adds disposal labor and dump fees.
Roof complexity
Valleys, dormers, chimneys, skylights, and steep hips add flashing and cut-in labor versus a simple gable.
Decking repairs
If we find rotted or soft decking under the old roof, replacing it is priced separately, but it's the right call.
Step One
Get a guaranteed quote in 60 seconds.
Pull your roof from satellite imagery, confirm a few details, and get an instant rate card, no field visit, no salesman, no obligation.
Prefer to talk to a human?
Call 512.882.1603Roof cost FAQs
What's the cheapest way to replace my roof?+
The lowest-cost option is 3-tab asphalt shingles, but most homeowners spend a little more for architectural (dimensional) shingles. They look far better, carry stronger wind warranties, and last about a decade longer for only ~$50–$100 more per square.
Is a metal roof worth the extra cost?+
A standing-seam metal roof costs roughly double an asphalt roof, but lasts 40–70 years (vs. ~30) and reflects Texas heat to lower cooling bills. If you plan to stay in the home long-term, the lifetime cost can come out even or ahead. If you're moving in a few years, asphalt usually makes more sense.
Will insurance pay for my roof replacement?+
If you have hail or wind damage and a current policy, almost always yes. You typically pay only your deductible. We document the damage and handle the claim with your adjuster end to end. See our roof insurance claim guide for the full process.
How do I know how many squares my roof is?+
Roughly: your home's footprint in square feet, divided by 100, times a pitch factor (about 1.1–1.4 for most homes). Most Central Texas homes are 18–25 squares. Our instant estimator pulls it from satellite imagery so you don't have to measure.